BCM5464R最新版器件手册
BCM5464R的最新版器件手册。
The BCM5464R transceiver consists of four triplespeed 10/100/1000BASE-T Ethernet transceivers. The
device performs all of the physical layer functions for
1000BASE-T, 100BASE-TX and 10BASE-T Ethernet
on standard Category 5 UTP cable. The BCM5464R is
designed to be fully compliant with the SGMII, RGMII,
and RTBI industry standards.
The BCM5464R is based on Broadcom’s proven digital
signal processor technology, combining digital adaptive
equalizers, ADCs, phase-locked loops, line drivers,
encoders, decoders, echo cancelers, crosstalk
cancelers and all other required support circuitry
integrated into a single monolithic CMOS chip.
Designed for reliable operation over worst-case
Category 5 cable plants, the BCM5464R automatically
negotiates with any transceiver on the opposite end of
the wire to agree on an operating speed. The PHY can
also evaluate the condition of the twisted-pair wiring to
ensure that the wiring can support operation at Gigabit
speeds, and detect and correct most common wiring
problems. The device continually monitors both the
wiring and the opposing transceiver, and alerts the
system if it detects potential problems with reliable
operation.
For single-port applications, refer to the BCM5461 or
BCM5461S data sheets
代码片段和文件信息
版权声明:本文内容由互联网用户自发贡献,该文观点仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容, 请发送邮件举报,一经查实,本站将立刻删除。
评论列表(条)