飞思卡尔 S12XEP100所有功能例程集合
文件包含了S12XEP100所有功能的例程,可直接使用。
包含了CAN驱动,LIN总线驱动,AD采样,SCI,PWM输出等等功能。
代码片段和文件信息
属性 大小 日期 时间 名称
----------- --------- ---------- ----- ----
文件 58002 2011-07-08 16:52 XEP100演示代码25040读写多字节25040several.mcp
文件 4263 2011-08-25 22:49 XEP100演示代码25040读写多字节25040several_DataCWSettingsWindows.stg
文件 14449 2011-07-08 16:50 XEP100演示代码25040读写多字节25040several_DataStandardobjectCodedatapage.c.o
文件 13716 2011-07-08 16:51 XEP100演示代码25040读写多字节25040several_DataStandardobjectCodemain.c.o
文件 340216 2011-07-08 16:50 XEP100演示代码25040读写多字节25040several_DataStandardobjectCodeMC9S12XEP100.c.o
文件 6097 2011-07-08 16:50 XEP100演示代码25040读写多字节25040several_DataStandardobjectCodeStart12.c.o
文件 1530357 2011-08-25 22:49 XEP100演示代码25040读写多字节25040several_DataStandardTargetDataWindows.tdt
文件 327178 2011-07-08 16:51 XEP100演示代码25040读写多字节inProject.abs
文件 1710 2011-07-08 16:51 XEP100演示代码25040读写多字节inProject.abs.glo
文件 1700 2011-07-08 16:51 XEP100演示代码25040读写多字节inProject.abs.s19
文件 242215 2011-07-08 16:51 XEP100演示代码25040读写多字节inProject.map
文件 1514 2011-07-08 16:47 XEP100演示代码25040读写多字节cmdTBDML_Erase_unsecure_hcs12xe.cmd
文件 59 2011-07-08 16:47 XEP100演示代码25040读写多字节cmdTBDML_Postload.cmd
文件 60 2011-07-08 16:47 XEP100演示代码25040读写多字节cmdTBDML_Preload.cmd
文件 60 2011-07-08 16:47 XEP100演示代码25040读写多字节cmdTBDML_Reset.cmd
文件 59 2011-07-08 16:47 XEP100演示代码25040读写多字节cmdTBDML_Startup.cmd
文件 77 2011-07-08 16:47 XEP100演示代码25040读写多字节cmdTBDML_Vppoff.cmd
文件 78 2011-07-08 16:47 XEP100演示代码25040读写多字节cmdTBDML_Vppon.cmd
文件 855 2011-07-08 16:47 XEP100演示代码25040读写多字节C_Layout.hwl
文件 161 2004-06-15 14:46 XEP100演示代码25040读写多字节Default.mem
文件 10141 2011-07-08 16:47 XEP100演示代码25040读写多字节prmurner.bbl
文件 16137 2011-07-08 16:47 XEP100演示代码25040读写多字节prmProject.prm
文件 68294 2011-07-08 16:47 XEP100演示代码25040读写多字节Sourcesdatapage.c
文件 264 2011-07-08 16:47 XEP100演示代码25040读写多字节Sourcesderivative.h
文件 5441 2011-07-08 16:50 XEP100演示代码25040读写多字节Sourcesmain.c
文件 22963 2011-07-08 16:47 XEP100演示代码25040读写多字节SourcesStart12.c
文件 2434 2011-07-08 16:52 XEP100演示代码25040读写多字节TBDML.ini
文件 73932 2017-06-26 10:35 XEP100演示代码485总线485.mcp
文件 60621 2018-02-05 16:26 XEP100演示代码485总线485.old.mcp
文件 4171 2018-02-05 16:27 XEP100演示代码485总线485.old_DataCWSettingsWindows.stg
............此处省略3052个文件信息
/******************************************************************************
FILE : datapage.c
PURPOSE : paged data access runtime routines
MACHINE : Freescale 68HC12 (Target)
LANGUAGE : ANSI-C
HISTORY : 21.7.96 first version created
******************************************************************************/
#include “hidef.h“
#include “non_bank.sgm“
#include “runtime.sgm“
#ifndef __HCS12X__ /* it‘s different for the HCS12X. See the text below at the #else // __HCS12X__ */
/*
According to the -Cp option of the compiler the
__DPAGE__ __PPAGE__ and __EPAGE__ macros are defined.
If none of them is given as argument then no page accesses should occur and
this runtime routine should not be used !
To be on the save side the runtime routines are created anyway.
If some of the -Cp options are given an adapted versions which only covers the
needed cases is produced.
*/
/* if no compiler option -Cp is given it is assumed that all possible are given : */
/* Compile with option -DHCS12 to activate this code */
#if defined(HCS12) || defined(_HCS12) || defined(__HCS12__) /* HCS12 family has PPAGE register only at 0x30 */
#define PPAGE_ADDR (0x30+REGISTER_base)
#ifndef __PPAGE__ /* may be set already by option -CPPPAGE */
#define __PPAGE__
#endif
/* Compile with option -DDG128 to activate this code */
#elif defined DG128 /* HC912DG128 derivative has PPAGE register only at 0xFF */
#define PPAGE_ADDR (0xFF+REGISTER_base)
#ifndef __PPAGE__ /* may be set already by option -CPPPAGE */
#define __PPAGE__
#endif
#elif defined(HC812A4)
/* all setting default to A4 already */
#endif
#if !defined(__EPAGE__) && !defined(__PPAGE__) && !defined(__DPAGE__)
/* as default use all page registers */
#define __DPAGE__
#define __EPAGE__
#define __PPAGE__
#endif
/* modify the following defines to your memory configuration */
#define EPAGE_LOW_BOUND 0x400u
#define EPAGE_HIGH_BOUND 0x7ffu
#define DPAGE_LOW_BOUND 0x7000u
#define DPAGE_HIGH_BOUND 0x7fffu
#define PPAGE_LOW_BOUND (DPAGE_HIGH_BOUND+1)
#define PPAGE_HIGH_BOUND 0xBFFFu
#define REGISTER_base 0x0u
#ifndef DPAGE_ADDR
#define DPAGE_ADDR (0x34u+REGISTER_base)
#endif
#ifndef EPAGE_ADDR
#define EPAGE_ADDR (0x36u+REGISTER_base)
#endif
#ifndef PPAGE_ADDR
#define PPAGE_ADDR (0x35u+REGISTER_base)
#endif
/*
The following parts about the defines are assumed in the code of _GET_PAGE_REG :
- the memory region controlled by DPAGE is above the area controlled by the EPAGE and
below the area controlled by the PPAGE.
- the lower bound of the PPAGE area is equal to be the higher bound of the DPAGE area + 1
*/
#if EPAGE_LOW_BOUND >= EPAGE_HIGH_BOUND || EPAGE_HIGH_BOUND >= DPAGE_LOW_BOUND || DPAGE_LOW_BOUND >= DPAGE_HIGH_BOUND || DPAGE_HIGH_BOUND >= PPAGE_LOW_BOUND || PPAGE_LOW_BOUND >= PPAGE_HIGH_BOUND
#error /* please adapt _GET_PAGE_REG for
属性 大小 日期 时间 名称
----------- --------- ---------- ----- ----
文件 58002 2011-07-08 16:52 XEP100演示代码25040读写多字节25040several.mcp
文件 4263 2011-08-25 22:49 XEP100演示代码25040读写多字节25040several_DataCWSettingsWindows.stg
文件 14449 2011-07-08 16:50 XEP100演示代码25040读写多字节25040several_DataStandardob
文件 13716 2011-07-08 16:51 XEP100演示代码25040读写多字节25040several_DataStandardob
文件 340216 2011-07-08 16:50 XEP100演示代码25040读写多字节25040several_DataStandardob
文件 6097 2011-07-08 16:50 XEP100演示代码25040读写多字节25040several_DataStandardob
文件 1530357 2011-08-25 22:49 XEP100演示代码25040读写多字节25040several_DataStandardTargetDataWindows.tdt
文件 327178 2011-07-08 16:51 XEP100演示代码25040读写多字节inProject.abs
文件 1710 2011-07-08 16:51 XEP100演示代码25040读写多字节inProject.abs.glo
文件 1700 2011-07-08 16:51 XEP100演示代码25040读写多字节inProject.abs.s19
文件 242215 2011-07-08 16:51 XEP100演示代码25040读写多字节inProject.map
文件 1514 2011-07-08 16:47 XEP100演示代码25040读写多字节cmdTBDML_Erase_unsecure_hcs12xe.cmd
文件 59 2011-07-08 16:47 XEP100演示代码25040读写多字节cmdTBDML_Postload.cmd
文件 60 2011-07-08 16:47 XEP100演示代码25040读写多字节cmdTBDML_Preload.cmd
文件 60 2011-07-08 16:47 XEP100演示代码25040读写多字节cmdTBDML_Reset.cmd
文件 59 2011-07-08 16:47 XEP100演示代码25040读写多字节cmdTBDML_Startup.cmd
文件 77 2011-07-08 16:47 XEP100演示代码25040读写多字节cmdTBDML_Vppoff.cmd
文件 78 2011-07-08 16:47 XEP100演示代码25040读写多字节cmdTBDML_Vppon.cmd
文件 855 2011-07-08 16:47 XEP100演示代码25040读写多字节C_Layout.hwl
文件 161 2004-06-15 14:46 XEP100演示代码25040读写多字节Default.mem
文件 10141 2011-07-08 16:47 XEP100演示代码25040读写多字节prmurner.bbl
文件 16137 2011-07-08 16:47 XEP100演示代码25040读写多字节prmProject.prm
文件 68294 2011-07-08 16:47 XEP100演示代码25040读写多字节Sourcesdatapage.c
文件 264 2011-07-08 16:47 XEP100演示代码25040读写多字节Sourcesderivative.h
文件 5441 2011-07-08 16:50 XEP100演示代码25040读写多字节Sourcesmain.c
文件 22963 2011-07-08 16:47 XEP100演示代码25040读写多字节SourcesStart12.c
文件 2434 2011-07-08 16:52 XEP100演示代码25040读写多字节TBDML.ini
文件 73932 2017-06-26 10:35 XEP100演示代码485总线485.mcp
文件 60621 2018-02-05 16:26 XEP100演示代码485总线485.old.mcp
文件 4171 2018-02-05 16:27 XEP100演示代码485总线485.old_DataCWSettingsWindows.stg
............此处省略3052个文件信息
版权声明:本文内容由互联网用户自发贡献,该文观点仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容, 请发送邮件举报,一经查实,本站将立刻删除。
评论列表(条)